Transfer case swap to a 2 speed - electric shift

FROM AWD'S TO 2-SPEED MANUAL SHIFT, IF IT LINKS THE REAR AXLE TO THE FRONT AXLE, POST IT HERE.

Astrophysics
I sleep in my van
Posts: 974
Joined: Sat Jan 12, 2008 9:23 pm
Been thanked: 9 times

Re: Transfer case swap to a 2 speed - electric shift

Post by Astrophysics »

I used some mild degreaser and a nylon scrub brush.
Attachments
image.jpg

Astrophysics
I sleep in my van
Posts: 974
Joined: Sat Jan 12, 2008 9:23 pm
Been thanked: 9 times

Re: Transfer case swap to a 2 speed - electric shift

Post by Astrophysics »

I will try to re install th nice Astro OEM forward brace strut which was used on the NP136 t-case. It looks like a good brace too have.

AP.

See photo of brace on NP136, may need to modify bracket or flange since np233c t -case seems to have some extra threaded holes on upper side.
Attachments
image.jpg

photo_van
I sleep in my van
Posts: 592
Joined: Wed May 18, 2011 4:38 pm
Location: 7000' in the Mountains of California
Been thanked: 3 times

Re: Transfer case swap to a 2 speed - electric shift

Post by photo_van »

2wd low can be nice if you do a lot of slickrock crawling, but you have to use it with caution. My DIY posiloc is still working great. I don't think I notice any difference in steering between 2wd and awd.
1998 AWD/4WD
4" lift, 31x10.50's, NP 242j/c hybrid, 4.10 gears, S10 front disconnect, rack & pinion steering, trans cooler, rock sliders, ARB fridge, house battery and 100w solar, swing out rear rack with foldout camp table, bed and passenger swivel chair
dirt bag camping rig
1981 Toyota 4x4 pu
1974 John Deere 710
Post Reply