AstroSafariVans.com

The premier site for Astro and Safari van information
It is currently Wed Dec 19, 2018 7:52 am

All times are UTC




Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 10 posts ] 
Author Message
 Post subject: WTB: Switch Blanking Plate (2gen dash, w/o rear heat or AC)
PostPosted: Tue Dec 05, 2017 5:14 pm 
Offline
ASV Supporter
ASV Supporter
User avatar

Joined: Tue Aug 04, 2009 5:45 pm
Posts: 587
Location: San Diego, CA
Hey gang,

I'm wondering if anyone has a spare "blanking plate" for the rear AC, rear Heater control, or rear wipers, they'd be willing to part with for a reasonable price.

As shown top right in this image:
Image

My rear heater is covered by my cabinetry so I never use it, and I'd like to use a blanking plate to add a regular rocker switch to control my air compressor in this spot instead.

GM lists these as "Hole Cover, Lower" (p/n 15998980) or "Hole Cover, Center" (p/n 15697530).

This is probably easy to find as a junkyard pull, but I don't know when I'll next have time to get to a yard and eBay has surprisingly failed me in this regard (only one listed, and they're asking $50 w/ shipping!!)

_________________
"My minivan is cooler than your bro-truck"
2003 Astro AWD Astrolander/ZMB - GTRV Top Transplant, 4" OLV Lift, NP233 T-case, evolving interior
1995 Safari GTRV Organ donor - gutted and gone.
Image


Top
 Profile  
 
 Post subject: Re: WTB: Switch Blanking Plate (2gen dash, w/o rear heat or
PostPosted: Wed Dec 06, 2017 5:56 am 
Online
I sleep in my van

Joined: Sun Jan 13, 2008 5:23 am
Posts: 775
Hi,

You can make your own from black or gray ABS plastic.
Sources are TAP Plastics, US Plastics, McMaster Carr, etc
Just measure one of the other panels.

AP


Top
 Profile  
 
 Post subject: Re: WTB: Switch Blanking Plate (2gen dash, w/o rear heat or
PostPosted: Wed Dec 06, 2017 6:01 am 
Online
I sleep in my van

Joined: Sun Jan 13, 2008 5:23 am
Posts: 775
Then center punch and drill hole for rocker switch.
Use label maker to label switch function


Top
 Profile  
 
 Post subject: Re: WTB: Switch Blanking Plate (2gen dash, w/o rear heat or
PostPosted: Wed Dec 06, 2017 6:06 am 
Offline
I finally get the smurf thing
User avatar

Joined: Sun Feb 12, 2012 3:10 pm
Posts: 149
Location: Boise, Id
Herbie, I am hoping to make it to my pick and pull in the next couple of weeks.... If I do I will grab one. They shouldn’t charge me for it so a few bucks in shipping should do it.

Have you thought about pulling the whole heater out? I needed the space for my
Fridge so I pulled it out including the lines all the way up to the engin compartment.

Ryan

_________________
2004 Astro (was AWD now 4X4) 125,000 miles: purchased April 2012
Colorado Camper Van poptop
4" Overland lift, Rancho 5000 Cooper AT3 245/75/16 C,
4x4 - NP236 Transfercase
Propex HS2211 propane heater
I am copying a few of you hope you don't mind!

See my build here


Top
 Profile  
 
 Post subject: Re: WTB: Switch Blanking Plate (2gen dash, w/o rear heat or
PostPosted: Wed Dec 06, 2017 3:13 pm 
Offline
I finally get the smurf thing

Joined: Sun Nov 14, 2010 8:09 pm
Posts: 167
PM me your address, I will send you one.

_________________
1990 Tiger GTv8, 90 TigerToo XL, 88 TreeTiger GT, 03 AWD POS
GoneBlue00,Brown99,Gray96

:poke:CLICK HERE Free Repair Manuals, Builds, Bluetooth Code Readers, best part prices, Pancake Distributor Disease & more
$10off Google Express https://goo.gl/sdibao


Top
 Profile  
 
 Post subject: Re: WTB: Switch Blanking Plate (2gen dash, w/o rear heat or
PostPosted: Wed Dec 06, 2017 7:53 pm 
Offline
ASV Supporter
ASV Supporter
User avatar

Joined: Tue Aug 04, 2009 5:45 pm
Posts: 587
Location: San Diego, CA
Astrophysics wrote:
You can make your own from black or gray ABS plastic.
Sources are TAP Plastics, US Plastics, McMaster Carr, etc
Just measure one of the other panels.


Was hoping to just get an easy snap-in one. I have the ABS to make one, but since the OEM ones can even get loose if the cable is routed wrong, I didn't want to try to get a flat piece of plastic without the "ears" to stay in place.

Snowgeek wrote:
Have you thought about pulling the whole heater out? I needed the space for my
Fridge so I pulled it out including the lines all the way up to the engin compartment.


I've thought about it. I'm not sure I'd remove everything, but I've considered at least splicing the send/return lines together under the body and yanking the core. As of today, I don't need the room, but an extra cubic foot of storage isn't anything to sneeze at.

AstroWill wrote:
PM me your address, I will send you one.

PM Sent. Thanks!

_________________
"My minivan is cooler than your bro-truck"
2003 Astro AWD Astrolander/ZMB - GTRV Top Transplant, 4" OLV Lift, NP233 T-case, evolving interior
1995 Safari GTRV Organ donor - gutted and gone.
Image


Top
 Profile  
 
 Post subject: Re: WTB: Switch Blanking Plate (2gen dash, w/o rear heat or
PostPosted: Thu Dec 07, 2017 2:37 am 
Offline
I finally get the smurf thing

Joined: Sun Nov 14, 2010 8:09 pm
Posts: 167
Herbie wrote:
AstroWill wrote:
PM me your address, I will send you one.

PM Sent. Thanks!


Got your address, will dig it out next week, don't worry about shipping.

_________________
1990 Tiger GTv8, 90 TigerToo XL, 88 TreeTiger GT, 03 AWD POS
GoneBlue00,Brown99,Gray96

:poke:CLICK HERE Free Repair Manuals, Builds, Bluetooth Code Readers, best part prices, Pancake Distributor Disease & more
$10off Google Express https://goo.gl/sdibao


Top
 Profile  
 
 Post subject: Re: WTB: Switch Blanking Plate (2gen dash, w/o rear heat or
PostPosted: Wed Jan 24, 2018 5:56 pm 
Offline
I finally get the smurf thing
User avatar

Joined: Sun Feb 12, 2012 3:10 pm
Posts: 149
Location: Boise, Id
Herbie, did you get one of these dash banks? I was at the p&p today and grabbed one for myself and one for you if you still need it. My yard never charges me for stuff like this so no big deal either way.

Ryan

_________________
2004 Astro (was AWD now 4X4) 125,000 miles: purchased April 2012
Colorado Camper Van poptop
4" Overland lift, Rancho 5000 Cooper AT3 245/75/16 C,
4x4 - NP236 Transfercase
Propex HS2211 propane heater
I am copying a few of you hope you don't mind!

See my build here


Top
 Profile  
 
 Post subject: Re: WTB: Switch Blanking Plate (2gen dash, w/o rear heat or
PostPosted: Wed Jan 24, 2018 7:16 pm 
Offline
I finally get the smurf thing

Joined: Sun Nov 14, 2010 8:09 pm
Posts: 167
Yes, he does, because I haven't been able to find mine in the black hole that I call storage. I know that I have two of them, but I guess that really doesn't matter when you can't find them.

_________________
1990 Tiger GTv8, 90 TigerToo XL, 88 TreeTiger GT, 03 AWD POS
GoneBlue00,Brown99,Gray96

:poke:CLICK HERE Free Repair Manuals, Builds, Bluetooth Code Readers, best part prices, Pancake Distributor Disease & more
$10off Google Express https://goo.gl/sdibao


Top
 Profile  
 
 Post subject: Re: WTB: Switch Blanking Plate (2gen dash, w/o rear heat or
PostPosted: Thu Feb 22, 2018 5:11 pm 
Offline
ASV Supporter
ASV Supporter
User avatar

Joined: Tue Aug 04, 2009 5:45 pm
Posts: 587
Location: San Diego, CA
Snowgeek hooked me up!

I am now good for this. Mods can close this thread at their convenience.

_________________
"My minivan is cooler than your bro-truck"
2003 Astro AWD Astrolander/ZMB - GTRV Top Transplant, 4" OLV Lift, NP233 T-case, evolving interior
1995 Safari GTRV Organ donor - gutted and gone.
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 10 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group